Nortel Networks CTA 150i User Manual
CTA 150i card installation
3
Computer Telephony Adapter 150 Installation Guide
Installing the CTA 150i card
When you are ready to begin installing the card, power down the PC and
unplug the PC’s power cord from the wall outlet. Make sure that you have
the proper size screwdrivers for the task.
unplug the PC’s power cord from the wall outlet. Make sure that you have
the proper size screwdrivers for the task.
To install the CTA 150i card:
1.
Remove the outer cover from your PC.
2.
Select an unused expansion slot.
3.
Remove the cover of the selected expansion slot from the rear panel of
the PC. Save the retaining screw.
the PC. Save the retaining screw.
4.
If a plastic insert covers the expansion slot, use a screwdriver to
remove it. You can discard the insert.
remove it. You can discard the insert.
5.
Insert the CTA 150i card into the selected slot. Align the elongated
notch on the card bracket with the screw hole in the rear panel of the
PC.
notch on the card bracket with the screw hole in the rear panel of the
PC.
6.
Insert and tighten the retaining screw that you removed in step 3.
7.
Replace the PC’s cover and secure it properly.
8.
Plug the PC power cord into the wall outlet and turn the power switch
to the ON position.
to the ON position.