Sony SDM-S73 User Manual

(US)

Setup

Unpacking

Make sure your carton contains everything listed below.
• LCD display
• Power cord
• HD15-HD15 video signal cable
• CD-ROM (utility software for Windows/Macintosh, Operating

Instructions, etc.)

• Warranty card
• This Quick Setup Guide

Connecting your monitor

Connect your monitor to a computer or other equipment.

Slide up the back cover.

Tilt the display forward.

Connect your monitor to a computer.

Connecting a Macintosh computer

Connect the supplied video signal cable to a video output connector
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.

Connect the supplied power cord securely to the
monitor’s AC IN connector.

Connect the other end securely to a power outlet.

Note

For bundling the cords and cables, refer to the Operating Instructions on
the supplied CD-ROM.

Turning on the monitor and
computer

Turn on your monitor first, then a computer.

Press the MAIN POWER switch on the right side of
the monitor in the direction of the

[

, if it is not

already pressed. Make sure the

( power) indicator

is lit in red.

Note

The default setting of the MAIN POWER switch is in the direction of
the [.

Press the

(power) switch on the front right of the

monitor.

The 1 (power) indicator lights up in green.

• Turn off the monitor, computer, and any other

equipment before connecting them.

• Do not touch the pins of the video signal cable plug.

back cover

HD-15

power cord (supplied)

to AC IN

to power outlet

HD15-HD15 video
signal cable (analog
RGB) (supplied)

Illustrations of monitor
rear are the SDM-S53.
The same applies for
the SDM-S73 model.
SDM-S93 has the AC
IN connector on the left
of the stand.