Gateway 7001 Series User Manual
101
www.gateway.com
(Start by choosing
For Internal and Guest access, use two: Ethernet Ports
as described in
.)
3
Provide the radio interface settings and network names (SSIDs) for both internal and
guest networks as described in
guest networks as described in
4
Configure other settings on the access point as needed (not necessarily specific to the
guest network) as described in this guide.
guest network) as described in this guide.
Configuring a guest network on a virtual LAN
To configure internal and guest networks on virtual LANs:
1
Configure Ethernet (Wired) settings for internal and guest networks on VLANs as
described in the sections in
described in the sections in
.
(Start by choosing
For Internal and Guest access, use two: VLANs
as described in
.)
2
Provide the radio interface settings and network names (SSIDs) for both internal and
guest networks as described in
guest networks as described in
3
Configure other settings on the access point as needed (not necessarily specific to the
guest network) as described in this Administration Guide.
guest network) as described in this Administration Guide.
Configuring the guest welcome screen (captive portal)
You can set up or modify the welcome screen guest clients see when they open a Web
browser or try to browse the Web.
browser or try to browse the Web.
Important
If you want to configure the Guest and Internal networks
on Virtual LAN (VLANs), the switch and DHCP server you
are using must support VLANs.
on Virtual LAN (VLANs), the switch and DHCP server you
are using must support VLANs.
As a prerequisite step, configure a port on the switch for
handling VLAN tagged packets as described in the IEEE
802.1Q standard.
handling VLAN tagged packets as described in the IEEE
802.1Q standard.
Guest Welcome Screen settings are shared among access
points across the cluster. When you update these settings
for one access point, the configuration will be shared with
the other access points in the cluster. For more information
about which settings are shared by the cluster and which
are not, see
points across the cluster. When you update these settings
for one access point, the configuration will be shared with
the other access points in the cluster. For more information
about which settings are shared by the cluster and which
are not, see
.