Sun Microsystems 3U User Manual
36
SunATM 3U CompactPCI Adapter Installation and User’s Guide • February 2001
Permanent Virtual Circuit (PVC)
The Permanent Virtual Circuit parameter applies only to standalone configurations.
It identifies the PVC that will be used to communicate between the two systems
connected back to back. Both systems must use the same PVC value. The PVC
parameter must be an integer (not hexadecimal) between 32 and 1023.
It identifies the PVC that will be used to communicate between the two systems
connected back to back. Both systems must use the same PVC value. The PVC
parameter must be an integer (not hexadecimal) between 32 and 1023.
LAN Emulation Parameter Group
LAN emulation, standardized by the ATM Forum’s LAN emulation 1.0 specification,
is another way of providing TCP/IP and UDP/IP support over an ATM interface.
Address resolution information is provided by a series of LAN emulation services.
When a LAN Emulation interface is brought up, it must register with these LAN
Emulation services (known as “joining the LAN”). This registration process and the
address resolution process are described in “LAN Emulation” on page 69.
is another way of providing TCP/IP and UDP/IP support over an ATM interface.
Address resolution information is provided by a series of LAN emulation services.
When a LAN Emulation interface is brought up, it must register with these LAN
Emulation services (known as “joining the LAN”). This registration process and the
address resolution process are described in “LAN Emulation” on page 69.
Unlike Classical IP, the LAN Emulation protocol provides a broadcast service to the
upper-layer protocols. Therefore, the multicast and RIP limitations described in
“Classical IP Parameter Group” on page 32 do not affect LAN Emulation interfaces.
upper-layer protocols. Therefore, the multicast and RIP limitations described in
“Classical IP Parameter Group” on page 32 do not affect LAN Emulation interfaces.
The SunATM software allows a single ATM interface to join up to 16 emulated local
area networks (ELANs), provided that this action is allowed by the switch and LAN
Emulation (LANE) services. Each ELAN joined is represented by a unique lane
instance (for example,
area networks (ELANs), provided that this action is allowed by the switch and LAN
Emulation (LANE) services. Each ELAN joined is represented by a unique lane
instance (for example,
lane0
or
lane1
).
Note –
A requirement for supporting this feature is that the adapter card be
assigned multiple MAC addresses, which the adapter supports. Use the
atmgetmac(1M)
command with the
count
option to find the number of MAC
addresses assigned to your SunATM adapter.