Sun Microsystems 3U User Manual
Chapter 5
Editing SunATM Configuration Files
55
describes the required, optional, and illegal fields for each flag type.
a
Represents an address that may have access to this host. If no
a
entries appear
in the
laneconfig
file, access to the host is unrestricted. Including a entries
allows access to be restricted to known hosts. As an alternative to listing
individual addresses, the ATM address field may contain a prefix, followed by
the wildcard
individual addresses, the ATM address field may contain a prefix, followed by
the wildcard
$anymacsel
, which matches any 7-byte ESI/Selector combination
following the given prefix. This allows access by any host connected to the
switch specified by the given prefix. Mac Address and VCI should not appear;
ATM Address is required. See
switch specified by the given prefix. Mac Address and VCI should not appear;
ATM Address is required. See
.
c
This flag allows an alternate LECS address to be specified. By default, the
SunATM software uses the well-known address specified in the LAN Emulation
standard. If, however, your LECS has a different address, or you want to
connect to the LECS over a PVC, you may provide the alternate ATM address or
VCI in a c entry. If you want to make a PVC connection, the VCI must be 17, as
required by the LAN Emulation standard. The interface and ATM address or
VCI must be included.
SunATM software uses the well-known address specified in the LAN Emulation
standard. If, however, your LECS has a different address, or you want to
connect to the LECS over a PVC, you may provide the alternate ATM address or
VCI in a c entry. If you want to make a PVC connection, the VCI must be 17, as
required by the LAN Emulation standard. The interface and ATM address or
VCI must be included.
s
This flag specifies the LES address or VCI, and instructs the system to contact
the LES directly, and to use default subnet configuration information. This flag
should be used if your subnet does not have an LECS. Without this entry, the
system first connects to the LECS, which provides the LES address and
configuration information.
the LES directly, and to use default subnet configuration information. This flag
should be used if your subnet does not have an LECS. Without this entry, the
system first connects to the LECS, which provides the LES address and
configuration information.
m
Notifies the system that the entire ATM address, including the network prefix,
must be configured manually on this interface. If your interface is connected to
a switch that does not support ILMI address registration, you must include this
option in your or
must be configured manually on this interface. If your interface is connected to
a switch that does not support ILMI address registration, you must include this
option in your or
/etc/opt/SUNWconn/atm/laneconfig
file. Note that the
variables
$myaddress
,
$prefix
, and
$localswitch_server
(which use the
switch prefix obtained from the switch via ILMI) may not be used if ILMI
address registration is disabled.
address registration is disabled.
TABLE 5-7
laneconfig
Flag Requirements and Options
Interface
MAC Address/ELAN Name
ATM Address
VCI
Flag
required
optional
required
illegal
l
required
required
xor
1
xor
1
t
required
Emulated LAN name
illegal
illegal
n
required
MTU size in bytes
illegal
illegal
M
required
illegal
required
illegal
a
required
illegal
xor
1
xor
c
TABLE 5-6
/etc/opt/SUNWconn/atm/laneconfig
Flag Descriptions (Continued)
Flag
Description