Sun Microsystems 1.0 User Manual
Troubleshooting and Diagnostics
37
5
▼ To Check the IP Routing
1. Check the IP routing table using the
netstat(1M)
command:
2. Check that the FDDI subnetwork is featured in the routing table.
If the routing table is empty, check that the routing daemon (
in.routed
) is
running on your machine.
▼ To Check the Protocol Statistics
♦ Use
netstat(1M)
to check the per-protocol (IP, TCP, UDP, etc.) statistics
for errors:
% netstat —nr
# netstat -s
UDP
udpInDatagrams = 1423udpInErrors = 0
udpOutDatagrams = 540
TCP tcpRtoAlgorithm = 4tcpRtoMin = 200
tcpRtoMax = 60000tcpMaxConn = -1
tcpActiveOpens = 38tcpPassiveOpens = 1
tcpAttemptFails = 0tcpEstabResets = 33
tcpCurrEstab = 2tcpOutSegs = 427
tcpOutDataSegs = 264tcpOutDataBytes = 15917
tcpRetransSegs = 38tcpRetransBytes = 0
tcpOutAck = 143tcpOutAckDelayed = 56
tcpOutUrg = 1tcpOutWinUpdate = 0
tcpOutWinProbe = 0tcpOutControl = 111
tcpOutRsts = 36tcpOutFastRetrans = 0
tcpInSegs = 606
tcpInAckSegs = 292tcpInAckBytes = 15949
tcpInDupAck = 62tcpInAckUnsent = 0
tcpInInorderSegs = 311tcpInInorderBytes = 99169
tcpInUnorderSegs = 0tcpInUnorderBytes = 0
.
.
.