Telex btr-1 Leaflet
BTR-1 & TR-1 Specifications
Overall
RF Frequency Range
482 - 608 MHz, 614 - 746 MHz in 18 MHz TX and RX
bands
BTR-1 Power Requirements
12-15 volts AC/DC @ 1 Amp
TR-1 Power Requirements
6 “AA” Cells Alkaline (NiMH optional)
Temperature Range
-4° F to 130° F (-20° C to 55° C)
TX Antenna
BTR-1: ½ wave (supplied), TNC Male Connector
TR-1: ¼ wave (supplied), Screw type Replaceable
RX Antenna
BTR-1: ½ wave (supplied), TNC Male Connector
TR-1: ¼ wave (supplied), Screw type Replaceable
FCC ID
BTR-1 (B5DM519), TR-1 (B5DM520)
Frequency Response
100 Hz - 4.0 kHz
4-Wire Input and Output
Level Adjustable (2 Vrms typical)
Telex Intercom
Input/Output Level Adjustable (1 Vrms typical), Line
Impedance 300W
RTS Intercom
Input/Output Level Adjustable (0.775 Vrms typical), Line
Impedance 200W
Clear-Com Intercom
Input/Output Level Adjustable (1 Vrms typical), Line
Impedance 200W
Auxiliary Input
Level Adjustable (2 Vrms typical)
Auxiliary Output
Level Adjustable (2 Vrms typical into 600W)
Microphone Input Sensitivity
BTR-1: 10 mV (200W Source)
TR-1: 7 mV (200W Source)
Local Headset Output
200 mW output into 150W (1% Distortion)
Mute of Wire Income Port
100 dB (30 kHz Low Pass Filtered)
TR-1 Current Draw
190 mA (Push-to-Talk, Talk On)
Transmitter
Type
Synthesized Transmitter, 720 channels
Transmit Power
50 mW typical (High), 5 mW typical (Normal)
Modulation Type
GMSK
Deviation
Complies with FCC 74.861
RF Frequency Stability
0.005%
Radiated Harmonics & Spurious
Exceeds FCC specifications
Receiver
Receiver
Type
Dual Conversion Superheterodyne, 720 channels each
RF Sensitivity
<0.8 μV for 12 dB SINAD
IF Selectivity
3 dB at 230 kHz
Image Rejection
70 dB or better
RF Frequency Stability
0.005%
Distortion
<1% at peak level
S/N Ratio out to wired Intercom Ports
80 dB (30 kHz Low Pass Filtered)
Product Dimensions/Weight
Product Dimensions/Weight
BTR-1
8.25”W x 1.72”H x 9.00”D (20.9cm x 4.4cm x 22.9cm),
3 lbs 8 oz (1.59 kg)
TR-1
3.75”W x 1.65”H x 5.10”D (9.5cm x 12.9cm x 4.2cm),
15 oz (425g) with alkaline batteries
Shipping Dimensions/Weight
Shipping Dimensions/Weight
BTR-1
12”W x 4”H x 16”D (30.48cm x 10.16cm x 40.64cm),
6 lbs 3 oz (2.86 kg)
TR-1
7”W x 4”H x 14”D (17.78cm x 10.16cm x 35.56cm),
1 lb 4 oz (.635 kg)
Ordering Information
BTR-1
UHF-Synthesized Digitally Encrypted Base Station
Transceiver
Catalog Number: 71897XX
TR-1
UHF-Synthesized Digitally Encrypted Beltpack
Transceiver
Catalog Number: 71898XX
This specifications information is preliminary and is subject to change without notification.
Brand names mentioned are the property of their respective companies.
Contact Information
Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, Minnesota 55337
Telephone: 877-863-4169
Fax: (800) 323-0498
Form Number: LIT000267000 Rev A
Date: August 2008