Liebert DS User Manual

Upon arrival of the unit and before unpacking it, verify that the labeled equipment matches the bill of 

lading. Carefully inspect all items for damage, either visible or concealed. For initial access use a 

7/32" Allen wrench for panel removal. Damage should be immediately reported to the carrier and a 

damage claim filed with a copy sent to Emerson Network Power or to your sales representative.

All material used to package this unit is recyclable. Please save for future use or 

dispose of the material appropriately.

Risk of overhead interference. The unit may be too tall to fit through a doorway while on the 

skid. Measure the unit and doorway heights and refer to the installation plans to verify 

clearances prior to moving the unit. If the Liebert DS is too large to fit through doors, halls or 

other tight spaces, the unit can be partly dismantled as detailed in 6.0 - Disassembling the 

Liebert DS for Transport.

Risk of damage from forklift. Keep tines of the forklift level and at a height suitable to fit 

below the skid and/or unit to prevent exterior and/or underside damage.

Risk of damage from forklift. Keep tines of the forklift level and at a height suitable to fit 

below the skid and/or unit to prevent exterior and/or underside damage.

Risk of improper storage. Keep the Liebert DS upright, indoors and protected from dampness, 

freezing temperatures and contact damage.

Risk of top-heavy unit falling over. Can cause equipment damage, injury or death.
Read all of the following instructions before attempting to move the unit, lift it, remove 

packaging or prepare the unit for installation.

Risk of sharp edges, splinters and exposed fasteners. Can cause personal injury.
Only properly trained personnel wearing appropriate safety headgear, gloves, shoes and 

glasses should attempt to move the unit, lift it, remove packaging or prepare the unit for 

installation.