LevelOne FCS-1060 User Manual

 

 48 

The following table lists the LED patterns in general. 

Condition LED 

color 

Loading system after power on 

Steady red 

During booting procedure 

Steady green, blue and red 

Detecting and setting network 

Steady green and blue. Blink red till IP address is 
confirmed 

After network is setup (system up) 

Blink green every second and steady red 

During the upgrade firmware process 

Blink green every second and fast blink red 

Enable audio 

Steady blue. Disable audio will turn off blue LED. 

There is a button in the back side of the Network Camera. It is used to reset the system or restore 
the factory default settings. 
 
RESET:   Click on the button. 
RESTORE:  
1. Press on the button continuously. 
2. Wait for all LED blink fast. 
3. Free the button. 

 

 

  Restoring the factory defaults will erase any previous settings.