Lantronix EPS2-100 User Manual

NetWare Configuration

The print server has successfully 
attached to the queue

Type NETSTAT at the Local> prompt. This will display 
information about fileservers, printers, and queues that the 
print server has found. If a queue is in JobPoll, the print server 
has successfully attached to the queue.

The DSTree, DSContext, and 
DSLicense

Type Show Protocol NetWare NDS. This command shows 
the tree and the context that you have configured, a failure 
code, and an NDS error code for each server. 

DSTree is the directory service tree on which the print server is 
located. DSContext is the context where the print server is 
located; it must match the context on the file server (The 
DSContext must be of the following form: ou=fruit.o=exotic). 
DSLicensed should be yes.

Printer and queue changes have 
propagated through the NDS tree

It may take a few minutes for the changes to propagate. If the 
print server doesn’t attach, reboot the server.

Table 5-2:  NetWare Host Troubleshooting (NDS), cont.