Delta Electronics VFD-F Series User Manual
3
VFD-F Series
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
3-5
3.2 External Wiring
R/L1 S/L2 T/L3
U/T1 V/T2 W/T3
B2
-
+/B1
E
E
BR
VF
DB
BR
EMI Filter
Power Supply
FUSE/NFB
Magnetic
Contactor
Input AC
Line Reactor
Line Reactor
Zero-phase
Reactor
B
ra
ke
R
e
s
is
to
r
(O
p
ti
o
n
a
l)
B
ra
ke
U
n
it
(O
p
ti
o
n
a
l)
Zero-phase
Reactor
Reactor
Output AC
Line Reactor
Motor
Items Explanations
Power
supply
supply
Please follow the specific power
supply requirements shown in
Appendix A.
supply requirements shown in
Appendix A.
Fuse/NFB
(Optional)
(Optional)
There may be an inrush current
during power up. Please check the
chart of Appendix B and select the
correct fuse with rated current. Use
of an NFB is optional.
during power up. Please check the
chart of Appendix B and select the
correct fuse with rated current. Use
of an NFB is optional.
Magnetic
contactor
(Optional)
contactor
(Optional)
Please do not use a Magnetic
contactor as the I/O switch of the AC
motor drive, as it will reduce the
operating life cycle of the AC drive.
contactor as the I/O switch of the AC
motor drive, as it will reduce the
operating life cycle of the AC drive.
Input AC
Line Reactor
(Optional)
Line Reactor
(Optional)
Used to improve the input power
factor, to reduce harmonics and
provide protection from AC line
disturbances (surges, switching
spikes, short interruptions, etc.). AC
line reactor should be installed when
the power supply capacity is 500kVA
or more or advanced capacity is
activated. The wiring distance should
be
factor, to reduce harmonics and
provide protection from AC line
disturbances (surges, switching
spikes, short interruptions, etc.). AC
line reactor should be installed when
the power supply capacity is 500kVA
or more or advanced capacity is
activated. The wiring distance should
be
≤
10m. Refer to appendix B for
details.
Zero-phase
Reactor
(Ferrite Core
Common
Choke)
(Optional)
Reactor
(Ferrite Core
Common
Choke)
(Optional)
Zero-phase reactors are used to
reduce radio noise especially when
audio equipment is installed near the
inverter. Effective for noise reduction
on both the input and output sides.
Attenuation quality is good for a wide
range from AM band to 10MHz.
Appendix B specifies the zero-phase
reactor. (RF220X00A)
reduce radio noise especially when
audio equipment is installed near the
inverter. Effective for noise reduction
on both the input and output sides.
Attenuation quality is good for a wide
range from AM band to 10MHz.
Appendix B specifies the zero-phase
reactor. (RF220X00A)
EMI filter
(Optional)
(Optional)
To reduce electromagnetic
interference, please refer to
Appendix B for more details.
interference, please refer to
Appendix B for more details.
Brake
Resistor
(Optional)
Resistor
(Optional)
Used to reduce the deceleration time
of the motor. Please refer to the chart
in Appendix B for specific Brake
Resistors.
of the motor. Please refer to the chart
in Appendix B for specific Brake
Resistors.
Output AC
Line Reactor
(Optional)
Line Reactor
(Optional)
Motor surge voltage amplitude
depends on motor cable length. For
applications with long motor cable
(>20m), it is necessary to install a
reactor at the inverter output side.
depends on motor cable length. For
applications with long motor cable
(>20m), it is necessary to install a
reactor at the inverter output side.