Delta Electronics LCP-10G3A4EDR User Manual
LCP-10G3A4EDR
DELTA ELECTRONICS, INC.
4 Revision:
0B
2008/9/5
www.deltaww.com
Optical Receiver Characteristics (T
c
= -5
to 70
)
℃
℃
Parameter
Symbol
Min.
Typ.
Max.
Unit
Note
Signaling speed (nominal)
T
S
10.3125
Gb/s
Signaling speed variation from
nominal.
nominal.
±100
ppm
Center Wavelength
λ
840 860 nm
Overload P
O
-1
dBm
Receiver sensitivity in OMA
RSO
-11.1
dBm
1
LOS De-assert
LOS
D
-11
dBm
LOS Assert
LOS
A
-27 dBm 2
LOS Hysteresis
LOS
D
-LOS
A
0.5 dB
Receiver Reflectance
-12
dB 3
Differential Output Amplitude
150 850 mV
Stressed Receive sensitivity OMA
-7.5
dBm
Notes:
1. Measured by reference TX with 4.75dB extinction ratio at 10
1. Measured by reference TX with 4.75dB extinction ratio at 10
-12
BER
2. When LOS asserted, the data output is Low-Level (fixed)
3. When the terminal is viewed from the optical path, the reflection toward the optical path of the optical
3. When the terminal is viewed from the optical path, the reflection toward the optical path of the optical
signal with a central wavelength of 840nm to 860nm transmitted to terminal.
4. Distance, shown in the “Link Length” table, are calculated for worst case fiber and transceiver
characteristics based on the optical and electrical specifications shown in this document using
techniques utilized in IEEE 802.3. In the nominal case, longer distance are achievable.
techniques utilized in IEEE 802.3. In the nominal case, longer distance are achievable.