Manualsbrain.com
  1. Manuals
  2. Brands
  3. Delta Electronics
  4. CME-PD01
  5. Leaflet

Delta Electronics CME-PD01 Leaflet

Download
Page of 2
                                                                                                                                     
2007-10-12
5011644101-PDT1
 
Profibus Communication Module (CME-PD01) Instruction Sheet 
‹
 Profibus is a registered trademark of Profibus International. 
‹
 Please thoroughly read and understand the following contents to ensure correct use before operation. 
‹
 The content of this instruction sheet may be revised without prior notice. Please consult our distributors or 
download the most updated version at http://www.delta.com.tw/industrialautomation
 
A. Panel 
Appearance 
1: Reserved  
2: EV     
5: SG+  
6: Reserved 
7: Reserved  
8: Reserved
3: GND 
4: SG-            
Profibus-DP
Interface (DB9)
RS-485 (RJ45)
ADDH ADDL
SP
NET
CME-P D01
SP LED
NET LED
Address Switches
 
1.  SP LED: Indicating the connection status between 
VFD-E and CME-PD01. 
2.  NET LED: Indicating the connection status between 
CME-PD01 and PROFIBUS-DP. 
3.  Address Switches: Setting the address of 
CME-PD01 on PROFIBUS-DP network. 
4.  RS-485 Interface (RJ45): Connecting to VFD-E, and 
supply power to CME-PD01. 
5.  PROFIBUS-DP Interface (DB9): 9-PIN connector 
that connects to PROFIBUS-DP network. 
6.  Extended Socket: 4-PIN socket that connects to 
PROFIBUS-DP network.
 
B. Dimensions 
5
7.
3
[2
.2
6]
59
.7
[2
.3
5]
3.
6
[0
.1
4]
72.2 [2.84]
3.5 [0.14]
34.8 [1.37]
ADDH ADDL
SP
NET
CME-P B01
 
 
 
 
 
 
C. 
Parameters Setting in VFD-E 
 
VFD-E 
Baud Rate 9600 
Pr.09.01=1 
RTU 8, N, 2 
Pr.09.04=3 
Freq. Source 
Pr.02.00=3 
Command Source 
Pr.02.01=3 
D. Power 
Supply 
The power of CME-PD01 is supplied from VFD-E. Please 
connect VFD-E to CME-PD01 by using 8 pins RJ-45 cable, 
which is packed together with CME-PD01. After connection 
is completed, CME-PD01 is powered whenever power is 
applied to VFD-E. 
E. PROFIBUS 
Address 
 
 
CME-PD01 has two rotary s select the PROFIBUS address. 
The set value via 2 address switches, ADDH and ADDL, is 
in HEX format. ADDH sets the upper 4 bits, and ADDL sets 
the lower 4 bits of the PROFIBUS address.   
 
  Address 
Meaning 
1..0x7D 
Valid PROFIBUS address 
0 or 0x7E..0xFE 
Invalid PROFIBUS address 
 
NOTE
 
Please download the GSD file and user manual at 
http://www.delta.com.tw/industrialautomation/