LSI 20160 User Manual
2-20
Installing the LSI20160
Copyright © 2001 by LSI Logic Corporation. All rights reserved.
2.3 Completing the Installation
Before replacing the cover on your computer, review this installation
procedure check list. This can save you effort later.
procedure check list. This can save you effort later.
Step 1.
Replace the cabinet cover on your computer.
Step 2.
Plug in all power cords, and switch on power to all devices and
your computer.
your computer.
Step 3.
Wait for your computer to boot up.
Step 4.
Refer to the LSI Logic PCI Storage Device Management
System SDMS 4.0 User’s Guide (or the guide for the software
you will use) to load the driver software for your particular
operating system and to change the configuration of your host
adapter, if needed.
System SDMS 4.0 User’s Guide (or the guide for the software
you will use) to load the driver software for your particular
operating system and to change the configuration of your host
adapter, if needed.
Verify Installation Procedures
Done
Host adapter connection in PCI bus slot secure
Internal SCSI bus connections secure (pin-1 continuity)
External SCSI bus connections secure
Proper SCSI bus termination established
Unique SCSI IDs set and recorded for each device