DELL 100-Mbps User Manual
System Overview
1-15
D
MA Channel Assignments
IRQ8
Generated by keyboard controller for each tick of RTC.
IRQ9
Available for use by expansion card.
IRQ10
Available for use by expansion card.
IRQ11
Available for use by expansion card.
IRQ12
Generated by keyboard controller to indicate that mouse’s output
buffer is full.
buffer is full.
IRQ13
Generated by math coprocessor to indicate coprocessor error.
IRQ14
Generated by device connected to primary EIDE port to indicate
that device requires service. If no EIDE devices are installed, this
line is available for other use.
that device requires service. If no EIDE devices are installed, this
line is available for other use.
IRQ15
Generated by device connected to secondary EIDE port to indi-
cate that device requires service. If no device is connected to
secondary EIDE port, IRQ15 is available for use by expansion
card.
cate that device requires service. If no device is connected to
secondary EIDE port, IRQ15 is available for use by expansion
card.
Table 1-4. DREQ Line Assignments
DREQ Line
Used By/Available
DREQ0
Available
DREQ1
Available
DREQ2
Generated by super I/O controller to initiate DMA cycle for
attached diskette drive
attached diskette drive
DREQ3
Available
DREQ4
Generated by bus controller chip to activate second DMA con-
troller
troller
DREQ5
Available (default) DMA on-board sound controller
DREQ6
Available
DREQ7
Available
Table 1-3. Interrupt Assignments (continued)
IRQ Line
Used By/Available