DELL 100-Mbps User Manual

Page of 80
4-10
Dell OptiPlex GXpro Systems Service Manual
Drives in the Drive Cage 
Figure 4-9.  3.5-Inch Diskette Drive Removal
To remove a drive from the 3.5-inch diskette drive bay, follow these steps:
1. Disconnect the DC power cable and the interface cable from the back of 
the drive.
2. Remove the bracket retaining screw.
3. Release the bracket catch from the chassis.
Rotate the drive bracket to the right, and lift the bracket from the top of the 
drive bay. 
4. Remove the two mounting screws from each side of the drive and 
remove the drive from the bracket.
To replace a 3.5-inch diskette drive, locate the two hooks on the right side of the 
bracket that hold the drive in position. Engage those two hooks in the side of the 
drive. 
bracket catch
bracket mounting 
screw (2)
retaining screw
hook (2)