DELL 100-Mbps User Manual
4-24
Dell OptiPlex GXpro Systems Service Manual
Add-In Card
Figure 4-24. Add-In Card Removal
To remove an add-in card, follow these steps:
1. Gently grip the card’s metal mounting bracket with both hands.
2. Pull up until the card is freed from the connector.
To reinstall the card, with the metal mounting bracket facing the left side of the
chassis, fit the edge of the bracket into the card guide attached to the back wall
of the chassis. Make sure that the bracket edge tab is below the bottom of the
guide.
chassis, fit the edge of the bracket into the card guide attached to the back wall
of the chassis. Make sure that the bracket edge tab is below the bottom of the
guide.
card guide
metal mounting
bracket
bracket
mounting-bracket
edge tab
edge tab
mounting-
bracket edge
bracket edge