Emulex 110 User Manual

Press 5 (Enable or Disable Spinup 
delay). The screen to the right is 
displayed.

Press 1 to enable the spinup delay, or 
press 2 to disable it.

Press x to exit the BIOS utility and 
reboot the system.

This option allows you to set auto scan.

The default setting is disabled.

This option is available only if none of the eight boot entries is configured to boot via DID or WWPN. It is strongly 
recommended that you use the Configure Boot Devices menu to configure eight boot entries for fabric point-to-point, 
public loop or private loop configurations.

With auto scan enabled, the first device will issue a Name Server Inquiry. The boot device will be either the first DID, 
LUN 0, or not LUN 0 device returned, depending on the option you select. Only this device will be the boot device 
and it will be the only device exported to the Multi-Boot Menu.

To set auto scan, do the following:

Start the BIOS utility (see section 3.1, Starting the BIOS Utility, on page 3-1.) and select the desired HBA. 
Press 2 to configure the adapter.

Press 6 (Auto Scan Setting). The screen 
to the right is displayed.

Press the number corresponding to the 
auto scan option you want to use:

Press 1 to disable auto scan.

Press 2 to scan for any first device. 
The first adapter issues a name 
server inquiry, and the first D_ID 
from the inquiry becomes the boot 
device. The adapter attempts to log 
in to a public loop first. If it fails, it logs in to a private loop. The first successfully scanned device 
becomes the boot device, and only this device is exported to the Multi-Boot Menu.

Press 3 to scan for the first LUN 0 device.

Press 4 to scan for the first device that is not LUN 0.

Press x to exit the BIOS utility and reboot the system.

 This option allows you to enable or disable the Enhanced Disk Drive (EDD) option, which is available on IA-64 
servers only. Enabling EDD 3.0 displays the path to the boot device.

The default setting is disabled.