Emulex 110 User Manual
NetWin 110 HBA User’s Guide
Page 6-1
6. Using a Microsoft Cluster Server
If you are using a Microsoft Cluster Server, any shared cluster storage must look identical to all clustered servers.
Ensure that this is the case by doing the following:
Ensure that this is the case by doing the following:
1.
After the HBA is installed, run the Emulex AutoPilot Manager utility.
2.
From the View menu, select Advanced Mode.
3.
Click the Target Mapping tab.
4.
Verify that, for any shared storage that is available to all clustered systems, the D_ID, SCSI_ID and Type
settings in the Current Mapping section are identical for all shared devices.
settings in the Current Mapping section are identical for all shared devices.