Lorex Technology DHU500 SERIES User Manual

Revision 1.0

PTZ Menu

Pan / Tilt / Zoom control (for Pelco D or Pelco P Model Cameras only)

1. PAN / TILT / ZOOM: Accesses the PTZ Control for a camera. Press the 

K 

and 

L 

buttons to 

highlight, and press the 

 button to access PTZ controls:

• LEFT/RIGHT - Pans the camera LEFT/RIGHT

• UP/DOWN - Tilts the camera UP/DOWN

• VOL UP/DOWN - Zooms the camera IN/OUT

• SEL/MENU - Stops viewing / Exits viewing

2. FOCUS:  Accesses the Focus Control for a camera. 

Press the 

K 

and 

L 

buttons to highlight, and press the 

 button to access FOCUS controls:

• UP/DOWN - Focuses NEAR/FAR

• SEL/MENU - Stops/Exits Menu

3. SETUP: Setup of the PTZ Cameras. Press the 

K 

and 

L 

buttons to highlight, and press the 

button to enter the SETUP menu:

• CHANNEL: Select the PTZ camera location (Channel 1-4, 

1-8, or 1-16 depending on model)

• ID: Set the camera ID (1-256, or OFF).

• Protocol: Select the PTZ Protocol (PELCO-D or PELCO-P)

• Baud Rate: Select the Baud Rate for the Camera (2400, 

4800 or 9600 BPS)

• SAVE & EXIT: Saves any changes, and exits to the previous 

menu.

PTZ (enter Password)

Pan/Tilt/Zoom
Focus
Setup
PTZ Controller Set

PTZ Controller Set
ID: 
Model: 
Baud Rate:
Save & Exit

Setup PTZ
Channel:
ID:
Protocol:
Baud Rate:

1

OFF

PELCO-P

2400

1

TB-CN

9600

Setup PTZ
Channel:
ID:
Protocol:
Baud Rate:

1

OFF

PELCO-P

9600