Lorex Technology DHU500 SERIES User Manual
46
INSTALLERS MANUAL |
Copyright
©
2006 Digimerge Technologies Inc.
Network Connectivity
SECTION 5
Network Connectivity
The DVR unit can be controlled using your existing network and a PC. The DVR Unit can be con-
trolled from within your network, or can also be controlled remotely through the Internet.
trolled from within your network, or can also be controlled remotely through the Internet.
DVR
ROUTER
(Not Included)
PC
(Not Included)
INTERNET
1. Connect the DVR to the Router.
Power the DVR on.
NOTE: It is recommended that the
DVR be connected to the router prior
to powering on the system.
DVR be connected to the router prior
to powering on the system.
The DVR can be automatically
assigned an IP address by the router
(and other network related settings),
or an IP address can be manually
assigned within the MENU -
NETWORK setup on Page 40.
assigned an IP address by the router
(and other network related settings),
or an IP address can be manually
assigned within the MENU -
NETWORK setup on Page 40.
2. Enable PORT FORWARDING on
your Router. Refer to the
instructions on Page 50 for details.
instructions on Page 50 for details.
Pages 51-53 for setup and
configuration instructions.
configuration instructions.
4. Access the DVR Software with
either a Local PC or Remote PC
using Microsoft Internet Explorer 5
(or higher). See the Operator’s
Manual for details.
using Microsoft Internet Explorer 5
(or higher). See the Operator’s
Manual for details.
NOTE: Microsoft IE is the ONLY
supported browser at this time.
supported browser at this time.