EMC QLA22xx User Manual

Installing an HBA

Follow the instructions included with your adapter. The adapter 
installs into a single slot, and has no user-configurable jumpers or 
switches.

Follow these steps to connect the cable to the HBA:

1. (Optical cable only) Remove the protective covers on each 

fiber-optic cable.

2. Plug one end of the cable into the connector on the HBA as shown 

in the appropriate figure. (The hardware might be rotated 90 
degrees clockwise from the orientation shown.)

• Copper Cable:

• LC Optical Cable:

• SC Optical Cable:

3. Plug the other end of the cable into a connector on the storage 

system or a hub/switch port.

2

1

3

2

1

3