EMC QLA22xx User Manual
A
A-2
Third-Party Software
QLogic SANSurfer SANBlade Manager v2.0.21
Stratus ftServers are not supported using the qLogic SANSurfer SANBlade
Manager Software or Agents.
Manager Software or Agents.
EMC has approved the use of a specialized version of the QLogic
SANSurfer SANBlade Manager for use with attached EMC
Symmetrix and CLARiiON storage arrays. Only version 2.0.21 should
be used; this version is posted in the EMC section on the QLogic
website.
SANSurfer SANBlade Manager for use with attached EMC
Symmetrix and CLARiiON storage arrays. Only version 2.0.21 should
be used; this version is posted in the EMC section on the QLogic
website.
This Windows utility provides information on the installed QLogic
HBAs, driver versions, mapped targets, statistics, and configuration
settings. It also has a feature to update the HBA firmware/BIOS and
NVRAM. (You should obtain the latest EMC-approved
firmware/BIOS and NVRAM files from the QLogic website. Refer to
Downloading QLogic Drivers and Firmware on page 2-2 for
instructions.)
HBAs, driver versions, mapped targets, statistics, and configuration
settings. It also has a feature to update the HBA firmware/BIOS and
NVRAM. (You should obtain the latest EMC-approved
firmware/BIOS and NVRAM files from the QLogic website. Refer to
Downloading QLogic Drivers and Firmware on page 2-2 for
instructions.)
For information on the use and features of the QLogic SANSurfer
SANBlade Manager utility, refer to the documentation posted with
this utility.
SANBlade Manager utility, refer to the documentation posted with
this utility.
The SANSurfer software is not multipath-aware, and as such may misreport
HBA targets that are configured in multipath. This does not affect the use of
the tool; however, it will accurately report targets only on ports that own an
active LUN0.
HBA targets that are configured in multipath. This does not affect the use of
the tool; however, it will accurately report targets only on ports that own an
active LUN0.