Xerox OS/2 WARP 4.0 User Manual
Page 1
OS/2 Warp 4.0 (NetBEUI) Peer-to-Peer Network Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
Xerox Document Centre 240/255/265 LP/ST
b)
On the keypad enter
1111 or the
current password. Press the
Enter
button when finished. If your printer is
an ST model press the
an ST model press the
Go to Tools
button, otherwise skip to the next step.
c)
The Touch Screen will be used for the
remainder of the data entry.
remainder of the data entry.
3.
Enable Microsoft Network printing.
a)
Press the
Connectivity and Network
Setup button.
b)
At the next screen, press the
Network
Setup button.
4.
Enable the Protocol and Media
a)
At the next screen, press the
Microsoft Networking button.
Microsoft Networking button.
b)
At the next screen, press the
Transport and Media button.
Transport and Media button.
c)
At the next screen, press the
Enable
button to enable the Microsoft Network
protocols.
protocols.
d)
Once enabled the Physical Media
portion of the screen will appear.
Press the corresponding button to
select one of the following,
portion of the screen will appear.
Press the corresponding button to
select one of the following,
NetBEUI/
Ethernet or NetBEUI/Token Ring.
After making your selection press
After making your selection press
Save.
5.
Assign the Workgroup and Host Names.
a)
You will be returned to the previous
screen, press the
screen, press the
Workgroup and
Host button.
b)
At the next screen, press the
Workgroup Name button. Using the
touch panel keys, enter the name of
the workgroup in which you want the
printer to appear then press
Workgroup Name button. Using the
touch panel keys, enter the name of
the workgroup in which you want the
printer to appear then press
Save.
c)
You will be returned to the previous
screen. Press the
screen. Press the
SMB Host Name
button, using the touch panel keys,
enter the desired text for this item then
press
enter the desired text for this item then
press
Save.
d)
OPTIONAL STEP: Press the
SMB
Host Description button, enter the
desired text then press
desired text then press
Save. You will
be returned to the previous screen.
e)
Press
Save again to return to the
previous screen.
Before You Start
If your printer is equipped with a Token Ring
interface, use the
interface, use the
Token Ring Quick Install
Card supplied in this Quick Install Card set to
set the Ring Speed and Source Routing settings
for your environment.
set the Ring Speed and Source Routing settings
for your environment.
Record the following information
Network Interface Type ___________________
Workgroup Name _______________________
SMB Host Name ________________________
Printer Name ___________________________
OPTIONAL INFORMATION:
SMB Host Description ____________________
Printer Description _______________________
Go to the printer and...
1.
Connect your Document Centre to the
network with the appropriate cabling.
network with the appropriate cabling.
2.
Enter the
Tools pathway
a)
Press the
Access ( )button.
For assistance, contact your local Xerox Customer Support Center:
USA: 1-800-821-2797 Canada: 1-800-939-3769
USA: 1-800-821-2797 Canada: 1-800-939-3769