WatchGuard Technologies V60 User Manual
CHAPTER 1: Hardware Descriptions
4
Vclass
Alarm
Illuminates when certain alarms are triggered. For
more information on alarms, see the Firebox Vclass
User Guide.
more information on alarms, see the Firebox Vclass
User Guide.
Admin
Illuminates when a system administrator is
connected to the appliance by means of the
Vcontroller or the WatchGuard CLI.
connected to the appliance by means of the
Vcontroller or the WatchGuard CLI.
The back panel of a Firebox V10 appliance contains the
interfaces and ports shown in the following illustration.
interfaces and ports shown in the following illustration.
0 (Private) and 1 (Public)
Two Ethernet interfaces (RJ-45 connectors) labeled
0 and 1, act as the primary data interfaces.
Incorporated into each Ethernet interface are two
indicator lights labeled 10 and 100. These LEDs
indicate the speed of traffic being transmitted.
0 and 1, act as the primary data interfaces.
Incorporated into each Ethernet interface are two
indicator lights labeled 10 and 100. These LEDs
indicate the speed of traffic being transmitted.
Console
A single RJ-45 interface permits a direct
workstation-to-appliance connection. You can use
the WatchGuard Command Line Interface (CLI) to
configure and administer this appliance. For more
information about this administrative option, see
the CLI Guide.
workstation-to-appliance connection. You can use
the WatchGuard Command Line Interface (CLI) to
configure and administer this appliance. For more
information about this administrative option, see
the CLI Guide.
Power
Console
1 (Public)
0 (Private)