Xerox 265 Leaflet
Page 1
Banyan VINES Network Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
Xerox Document Centre 240/255/265 LP/ST
d)
At the next screen, press the
Protocol
button.
e)
At the next screen, press the
Enable
button to start the Banyan Vines
protocol and press
protocol and press
Save.
4.
Configure User Name settings and
Password.
Password.
a)
At the next screen, press the
Settings
button.
b)
At the next screen, press the
User
Name/PC Print Destination button,
enter the desired text for this item
using the touch panel keys, then press
Save.
enter the desired text for this item
using the touch panel keys, then press
Save.
c)
Press the
User Password button,
enter the desired text for this item
using the touch panel keys, then press
Save.
using the touch panel keys, then press
Save.
d)
Press the
Print Service Name button,
enter the desired text for this item
using the touch panel keys, then press
Save.
using the touch panel keys, then press
Save.
e)
Press the
Exit Tools button.
5.
Wait a MINIMUM of 7 minutes for the
printer to reset.
printer to reset.
a)
Obtain a
Configuration Report page
from your printer.
b)
Check the
Configuration Report
page and verify that
Banyan VINES is
enabled and the other Banyan
Settings are correct.
Settings are correct.
6.
From the documentation package
supplied with your printer, retrieve the
CentreWare Network Services CD-ROM
(CD-ROM 2) and the document entitled
Getting Started with Print and Fax
Services. Proceed to the next section of
this procedure called
supplied with your printer, retrieve the
CentreWare Network Services CD-ROM
(CD-ROM 2) and the document entitled
Getting Started with Print and Fax
Services. Proceed to the next section of
this procedure called
Go to the server
and...
Before You Start
If your printer is equipped with a Token Ring
interface you must enable TCP/IP and use
interface you must enable TCP/IP and use
lpr to
submit print jobs. Use the
Token Ring Quick
Install Card supplied in this Quick Install Card
set to set the Ring Speed and Source Routing
settings for your environment.
set to set the Ring Speed and Source Routing
settings for your environment.
Go to the printer and...
1.
Connect your Document Centre to the
network with the appropriate cabling.
network with the appropriate cabling.
2.
Enter the
Tools pathway
a)
Press the
Access ( ) button.
b)
On the keypad enter
1111 or the
current password. Press the
Enter
button when finished. If your printer is
an ST model press the
an ST model press the
Go to Tools
button, otherwise skip to the next step.
c)
The Touch Screen will be used for the
remainder of the data entry.
remainder of the data entry.
3.
Enable Banyan VINES printing.
a)
Press the
Connectivity and Network
Setup button.
b)
At the next screen, press the
Network
Setup button.
c)
At the next screen, press the
Banyan
VINES button.
For assistance, contact your local Xerox Customer Support Center:
USA: 1-800-821-2797 Canada: 1-800-939-3769
USA: 1-800-821-2797 Canada: 1-800-939-3769