Raritan Computer II User Manual
14
P
ARAGON
II U
SER
M
ANUAL
3. Initially configure the User Station.
a. The Login Menu should be displayed on the User Station’s attached monitor. If the [Scroll Lock]
LED on the User Station’s attached keyboard is blinking, the Paragon is ready to accept hotkey
commands, which can be used with the OSUI to login, select servers, or administer the system.
commands, which can be used with the OSUI to login, select servers, or administer the system.
Figure 19 Login Menu for a P2-UMT832M
If the monitor instead displays a “.....No connection to Paragon.....” message, the User Station is not
properly connected to the Base Unit. Check for loose connections and make sure you are using good,
intact CAT5 cables.
b. Type
properly connected to the Base Unit. Check for loose connections and make sure you are using good,
intact CAT5 cables.
b. Type
admin in the User Name field and press the [Enter] key. In the Password field, type the
default password raritan (all lowercase) and press the [Enter] key.
c. The OSUI’s Selection Menu will appear, indicating that the User Station is correctly installed.
Figure 20 Selection Menu for a P2-UMT832M
4. Repeat steps 2 and 3 for each User Station you want to connect to the Base Unit.