Raritan Computer EMX2-111 User Manual
Chapter 5: EMX Device Management
91
Allow password authentication only: Enables the password-
based login only.
Allow public key authentication only: Enables the public key-
based login only.
Allow password and public key authentication: Enables both the
password- and public key-based login. This is the default.
5. Click OK to save the changes.
If the public key authentication is selected, you must type a valid SSH
public key for each user profile to log in over the SSH connection. See
public key for each user profile to log in over the SSH connection. See
Creating a User Profile
(on page 62).
Changing the Telnet Settings
You can enable or disable the Telnet access to the command line
interface, or change the default TCP port for the Telnet service.
interface, or change the default TCP port for the Telnet service.
To change the Telnet service settings:
1. Choose Device Settings > Network Services > Telnet. The Telnet
Settings dialog appears.
2. To use a different port, type a new port number in the field. Valid
range is 1 to 65535.
3. To enable the Telnet application, select the Enable Telnet Access
checkbox. To disable it, deselect the checkbox.
4. Click OK to save the changes.