Raritan Computer EMX2-111 User Manual
Chapter 5: EMX Device Management
102
Rebooting the EMX
You can remotely reboot the EMX device via the web interface.
Rebooting the EMX does not reset the configuration of the device as is
done during a factory reset.
Rebooting the EMX does not reset the configuration of the device as is
done during a factory reset.
Note: Rebooting the EMX deletes the snapshots taken via webcam.
To reboot the device:
1. Choose Maintenance > Unit Reset. The Reset Device dialog
appears.
2. Click Yes to reset the EMX.
3. A message appears with a countdown timer showing the remaining
time of the operation. It takes about one minute to complete.
4. When the reset is complete, the Login page opens. Now you can log
back in to the EMX device.
Note: If you are not redirected to the Login page after the reset is
complete, click the underlined text "this link" in the message.
complete, click the underlined text "this link" in the message.
Resetting to Factory Defaults
For security reasons, the EMX device can be reset to factory defaults
only at the local console.
only at the local console.
Important: Exercise caution before resetting the EMX to its factory
defaults. This erases existing information and customized settings,
such as user profiles, threshold values, and so on.
defaults. This erases existing information and customized settings,
such as user profiles, threshold values, and so on.
You can use either the reset button or the command line interface (CLI)
to reset the EMX.
to reset the EMX.
To reset to factory defaults using the reset button:
1. Connect a computer to the EMX device. See
Connecting the EMX
to a Computer
(on page 12).