Raritan Computer EMX2-111 User Manual
Chapter 8: Managing External Devices
163
Cascading EMX Devices
Note: When cascading devices, use a wired network connection.
Wireless connections are not supported when cascading devices.
Wireless connections are not supported when cascading devices.
To connect EMX devices to an EMX device:
1. If needed, upgrade the EMX firmware of each device that will be part
of the chain.
2. Plug a USB cable into the USB-B port on the slave EMX, and
connect it to the USB-A port on the master EMX.
3. If you are adding an additional EMXs to the chain, plug a USB cable
into USB-B port on the additional EMX, then plug the other end into
USB-A on the EMX that is already connected to the master EMX. Up
to three (3) EMXs can be connected to the master EMX.
USB-A on the EMX that is already connected to the master EMX. Up
to three (3) EMXs can be connected to the master EMX.
Cascading PX2 Devices with a EMX
Note: When cascading devices, use a wired network connection.
Wireless connections are not supported when cascading devices.
Wireless connections are not supported when cascading devices.
To connect PX2 devices to an EMX:
1. If needed, upgrade the EMX firmware of each device that will be part
of the chain.
2. Plug a USB cable into the USB-B port on the slave PX2 and connect
it to the USB-A port on the master EMX.