Raritan Computer EMX2-111 User Manual
Chapter 10: Using the Command Line Interface
321
Example 2 - Combination of SSID and PSK Parameters
This multi-command syntax configures both of SSID and PSK
parameters simultaneously for the wireless feature.
parameters simultaneously for the wireless feature.
config:#
network wireless SSID myssid PSK encryp_key
Results:
The SSID value is set to myssid.
The PSK value is set to encryp_key.
Quitting the Configuration Mode
Both of "apply" and "cancel" commands let you quit the configuration
mode. The difference is that "apply" saves all changes you made in the
configuration mode while "cancel" aborts all changes.
mode. The difference is that "apply" saves all changes you made in the
configuration mode while "cancel" aborts all changes.
To quit the configuration mode, use either command:
config:#
apply
-- OR --
config:#
cancel
The # prompt appears after pressing Enter, indicating that you have
entered the administrator mode.
entered the administrator mode.
Unblocking a User
If any user is blocked from accessing the EMX, you can unblock them at
the local console.
the local console.
To unblock a user:
1. Log in to the CLI interface using any terminal program via a local
connection. See
With HyperTerminal
(on page 213).
2. When the Username prompt appears, type unblock and press
Enter.