Raritan Computer DKSX880 User Manual
24
D
OMINION
KSX U
SER
M
ANUAL
2. Click on the [Add] button.
3. The Add Connection dialog appears, whose options are grouped into three tabs: Connect, Compression, and
3. The Add Connection dialog appears, whose options are grouped into three tabs: Connect, Compression, and
Security.
Connect Tab
•
Description: Enter a text name to easily identify the Raritan device that you are configuring, such as
"Atlanta_Datacenter."
"Atlanta_Datacenter."
•
Connection Type: Select TCP/IP Connection for a LAN/WAN connection; select Dial-Up Connection for a
direct analog modem connection to the Raritan device.
direct analog modem connection to the Raritan device.
For a TCP/IP Connection, select the manner by which RRC should locate your Raritan device:
•
IP Address: The IP address assigned to your Raritan device (see Chapter 4: Administrative Functions,
Network Configuration).
Network Configuration).
•
Name: The name assigned to your Raritan device during initial setup (see Chapter 4: Administrative
Functions, Network Configuration).
Functions, Network Configuration).
Note: If dynamic DHCP addressing is used for Dominion KSX, then Find Dominion KSX by
Name should be used.
Name should be used.
Note: The factory default unit name for each Dominion KSX produced is <Dominion KSX>. To
change the default name on a Dominion KSX unit and institute a unique name, see Chapter 4.
change the default name on a Dominion KSX unit and institute a unique name, see Chapter 4.
•
DNS Name: If you have configured your DNS server to resolve a DNS name to the IP address that you have
assigned to your Raritan device, you may use this DNS name to access your Raritan device.
assigned to your Raritan device, you may use this DNS name to access your Raritan device.
For a Dial-Up Connection, enter the dialing parameters that RRC should use to establish a connection:
•
Phone Number: Be sure to include any additional codes that RRC should dial to establish a connection, such as
country codes, area codes, outside line access codes, etc.
country codes, area codes, outside line access codes, etc.
•
Modem: Select the modem, as configured in Windows, that RRC should use to dial and connect to your Raritan
device.
device.
Select a TCP Port to use:
•
Use Default Port Number: Dominion KSX is configured by default to use TCP Port 5000 for communicating
with RRC. Dominion KSX can be configured to use a different TCP Port (see Chapter 4: Administrative
Functions, Network Configuration); if so, uncheck the Use Default Port Number option, and enter the
configured TCP Port to be used.
with RRC. Dominion KSX can be configured to use a different TCP Port (see Chapter 4: Administrative
Functions, Network Configuration); if so, uncheck the Use Default Port Number option, and enter the
configured TCP Port to be used.