Promise Technology TX2200 User Manual
99
Chapter 7: Support
•
Frequently Asked Questions
•
•
Pre-Installation, below
•
•
•
•
•
•
•
•
Contact Technical Support, page 106
•
Limited Warranty, page 109
•
Return Product for Repair, page 111
Frequently Asked Questions
This section lists frequently asked questions and other issues with the FastTrak
TX Series RAID Controller card.
TX Series RAID Controller card.
Pre-Installation
(Speed, Device Types, Capacity, Cabling)
What kind of hard drives can I use for a FastTrak disk array?
You can use any Serial ATA disk drive(s) to create disk arrays on the
FastTrak Serial ATA RAID Controller card. Use matching drives for multiple-
disk arrays to maximize capacity usage as well as performance.
FastTrak Serial ATA RAID Controller card. Use matching drives for multiple-
disk arrays to maximize capacity usage as well as performance.
Will ACPI work with disk drives on the FastTrak?
Yes.
Can I use ATAPI devices on the FastTrak?
No. The FastTrak TX Series does not support ATAPI devices.
How can I change the resources that the FastTrak Controller uses?
The FastTrak TX Series is fully PnP. This means all the resources that it
uses are given to it by the PnP BIOS on the motherboard. The FastTrak
Serial ATA RAID Controller does support IRQ sharing, but this will not work
unless ALL the concerned devices support the feature. If your motherboard
uses are given to it by the PnP BIOS on the motherboard. The FastTrak
Serial ATA RAID Controller does support IRQ sharing, but this will not work
unless ALL the concerned devices support the feature. If your motherboard