Promise Technology TX2200 User Manual
Chapter 5: WebPAM
63
•
Ultra DMA Mode – The UDMA mode in which this physical drive currently
operates.
operates.
•
S.M.A.R.T. Status – SMART, an acronym for Self-Monitoring Analysis and
Reporting Technology, is a feature of the physical drive’s software. When
this feature is supported, the drive will pass SMART information to the
FastTrak controller when it polls the physical drives.
Reporting Technology, is a feature of the physical drive’s software. When
this feature is supported, the drive will pass SMART information to the
FastTrak controller when it polls the physical drives.
•
Write Cache Status – Indicates whether the physical drive’s write cache is
Enabled or Disabled. You can change this status under the Settings tab (see
below).
Enabled or Disabled. You can change this status under the Settings tab (see
below).
Physical Drive Settings
Physical Drive Settings allows you to enable or disable the Write Cache and
Native Command Queuing (NCQ) on an individual physical drive. To access the
physical drive setting:
Native Command Queuing (NCQ) on an individual physical drive. To access the
physical drive setting:
1.
Click on the Physical Drive View
icon in Tree View.
2.
Click on the Physical Drive
icon.
3.
Click on the Settings tab in Management View.
4.
Click the Write Cache Enable or Disable option.
5.
Click the NCQ Enable or Disable option.
6.
Click the Submit button.
Physical Drive Media Patrol
The Physical Drive–Media Patrol tab allows you to start Media Patrol on an
individual physical (disk) drive. You can also run Media Patrol on all physical
drives at the same time, see page 60.
individual physical (disk) drive. You can also run Media Patrol on all physical
drives at the same time, see page 60.
Media Patrol is a routine maintenance procedure that checks the magnetic media
on each physical drive, sector by sector. Media Patrol checks physical drives
assigned to logical drives, spare drives and currently unassigned physical drives
that were once part of a logical drive or a spare. Media Patrol does not check new
physical drives that have never been configured nor physical drives assigned as
JBOD.
on each physical drive, sector by sector. Media Patrol checks physical drives
assigned to logical drives, spare drives and currently unassigned physical drives
that were once part of a logical drive or a spare. Media Patrol does not check new
physical drives that have never been configured nor physical drives assigned as
JBOD.