Promise Technology M200f User Manual
VTrak M-Class Product Manual
26
Connect the Power
Plug in the power cords and switch on both power supplies. When the power is
switched on, the LEDs on the front of the VTrak will light up.
switched on, the LEDs on the front of the VTrak will light up.
Figure 14.VTrak M500f/i/p front panel LED display
Figure 15.VTrak M300f/i/p and M200f/i/p front panel LED display
When boot-up is finished and the VTrak is functioning normally:
•
Controller LED blinks green once per second for five seconds, goes dark for
ten seconds, then blinks green once per second for five seconds again.
ten seconds, then blinks green once per second for five seconds again.
•
Power, FRU and Logical Drive LEDs display green continuously.
•
Fibre Channel/iSCSI/SCSI LEDs flash green if there is activity on that
channel.
channel.
Power
FRU
Status
Logical Drive
Status
FC/iSCSI/
SCSI-1
Activity
FC/iSCSI/
SCSI-2
Activity
Controller
Heartbeat
Power
FC/iSCSI/SCSI-2 Activity
FRU Status
Logical Drive Status
FC/iSCSI/SCSI-1 Activity
Controller Heartbeat