Gossen R2600 User Manual
GOSSEN METRAWATT GMBH
38
5 Storage operations
To store all parameter and configuration data of an equipment, it is not required to address all data individually via parameter indices. It is possible
instead to directly read and/or write all data stored in the non-volatile data memory (EEPROM) in one record.
This function serves to save the data, to quickly load or duplicate user-specific settings to the R2600/01. Length and format of the data block depends
upon the EEPROM allocation which can change with the software version of the R2600/01. That is why no information is given about it. Loading of a
record to the R2600/01 can, therefore, only be made for the same software version.
instead to directly read and/or write all data stored in the non-volatile data memory (EEPROM) in one record.
This function serves to save the data, to quickly load or duplicate user-specific settings to the R2600/01. Length and format of the data block depends
upon the EEPROM allocation which can change with the software version of the R2600/01. That is why no information is given about it. Loading of a
record to the R2600/01 can, therefore, only be made for the same software version.
5.1 Request a record
Make the request as described in 3.5, the parameter index = D8h.
Example: Equipment address = 4
Request from master (control set, see 2.2):
Response from R2600/01 (long set):
68h
06h
06h
68h
04h
89h
D8h
01h
01h
00h
67h
16h
FF
PI
PS
68h
L + 6
L + 6
68h
04h
„FF“
D8h
01h
01h
18h
Data block
„PS“
16h
PI
Software version
L character