Grandstream Networks GXW-410xv User Manual

The GXW-410xv also supports ONE STAGE dialing, which means users only need to input one final 

e 

 on 

y does not support direct inward dialing (DID).  The GXW-410xv implements an 

1)  Configure GXW with SIP Accounts in IP PBX, this will enable you to put GXW behind a 

2) 

 without SIP Accounts in IP PBX, this makes GXW function as a PEER gateway. 

 

ee the Quick Install Guide

PSTN number when first dial-tone is heard for calls from VOIP to PSTN. This requires configuring both 
SIP server and GXW-410xv to one stage dialing (see last section of quick guide and user manual for on
stage dialing). For one stage PSTN to VOIP calls, user needs to configure off-hook auto dial field (see 
last section on sample configuration 
 
 

The GXW-410xv can be configured to work with a variety of SIP server features and traditional PBX
PSTN networks, with a different SIP server on each physical port.   Each port may have its own voice 
setting, dialing settings, PSTN termination setting, and DTMF transmission settings.  
 
 

The FXO interface currentl
off-hook auto dial feature for each physical port.  Configure off-hook auto dial to forward PSTN incoming 
call to a specific SIP number, call center or hunt group. 
 
 

There are 2 methods to configure GXW to work with IP PBX:  
 

NAT/Firewall. 
Configure GXW

S

 at 

http://www.grandstream.com/user_manuals/GXW41xx_QuickIG.pdf

 for 

ote:  In regions other than North American, the user is also required to configure call progress tones 

se 

more information for quick installation. 
 
 
N
and PSTN line termination fields. Check with local PSTN service carriers on values service providers u
on the lines. If service provider doesn’t provide these values and users don’t know what the correct 
values are, please use the default values.  Contact product support for additional help in configuring 
GXW-410xv. 
 

your 

Grandstream Networks, Inc. 

GXW-410xv User’s Manual 

Page 8 of 30