Zhone Technologies 600 User Manual

3-4 

Model No.

Running Head

The State setting determines whether the port is active or inactive. Set the State to stdby 
(standby) to disable the Ethernet port, or choose actv (active) to enable the port.

When configured for unnumbered interfaces, the IP Address setting identifies the global IP 
Address of the MCC. This address is thus valid regardless of the state of the Ethernet port. 
When configured for numbered interfaces, the IP address of the Ethernet port identifies the IP 
address of the Ethernet interface only.

Save

Saves changes to settings.

Undo

Returns all settings to the last saved state.

Refresh

Redraws the screen.

Copy

Copies the contents of the current column to the next column. Useful if 
you change a lot of entries in one column and want to repeat those changes 
in subsequent columns.

<

The “less than” symbol scrolls backward through the 128 ports associated 
with this card.

>

The “greater than” symbol scrolls forward through the 128 ports associated 
with this card.

porT (C1-C3) The port option allows you to “jump” to a specific port. Enter the number 

of the port you wish to see, press the <Enter> key, and the requested port 
will be displayed. To return to the Main Screen, press “e” and then press 
<Enter>.

Nstat

Displays the Network Data Screen.

Main

Returns to the System Main Screen. If changes are made to settings and 
not saved, you will be prompted to save or lose changes.

STATE

stdby     actv

stdby

IPADDR

ip

0.0.0.0

NETMASK

ip

0.0.0.0

DEF RT

none     stat     dyn

none

RIP

off     rx     tx     rx/tx

off

SH

off     on

off

WEIGHT

01-15

01

FMT-MAIN

bxr     hdlc

bxr

FMT-SUB

bxr     hdlc

bxr

IF-TYPE

unnum    num

unnum