RCA 300 Series User Manual
2 SpeedTouch™ Installation
E-SIT-CTC-20030702-0003 v4.0
24
9
At the end of the procedure, the following window appears:
Click Restart to quit the installer.
The hardware
installation procedure
After restarting your computer, proceed as follows:
1
Use the ADSL cable provided to wire the SpeedTouch™ ADSL port to your tele-
phone wall outlet or distributed filter.
phone wall outlet or distributed filter.
2
Insert the SpeedTouch™'s USB connector into the computer's USB port.
A USB port can be easily located, it is marked with the typical USB symbol:
A USB port can be easily located, it is marked with the typical USB symbol:
.
Note
You can also connect your SpeedTouch™ to the computer via a USB
hub.
hub.
3
Click System Preferences on the Apple menu.
4
Click the Network icon in the System Preferences window.
5
Following window prompts you that a new port has been detected:
Click OK.
6
The Network window appears:
In the Show list, click Active Network Ports (or Network Port Configuration(s)), and
drag:
drag:
•
SpeedTouch™ USB to the top of the list in case of PPP connectivity.
•
Ethernet Adaptor (enx)
to the top of the list in case of RFC1483 connectivity.
7
If you do not intend to use the other interfaces, clear the corresponding check
boxes.
Click Apply Now to confirm the modifications to the network settings.
boxes.
Click Apply Now to confirm the modifications to the network settings.