RATOC Systems CBFW3 User Manual

       • Two external IEEE1394 ports are available at card.

       • IEEE-1394.a compatible PHY chip is on card.

       • Full backward compatibility to IEEE1394-1955 device.

       • OHCI 1.0 fully compliant Link chip is on card.

       • 100, 200 and 400Mbps data rate is automatically supported at each IEEE1394 port.

       • Class 1(15W) cable power is available at IEEE1394 port with additional cable power adapter.

       • Fully compliant with PC Card Standard 7.0.

       • 32-bit Bus-mastering data transfer and 33MHz operation.

•Windows users

  OS: Windows98 SE(Second Edition), Windows 2000, Windows Me(Millennium Edition)

  System: Pentium II 300MHz or above and Memory 64 MB or above are recommended for the

                 video editing. 

*1

                             

    High performance DMA enabled Hard Disk Drive is recommended.

*2

 

*1 

 If your PC can not meet the specifications above, video motion and  audio may get choppy.

 

*2    

It is neccessary to have about 4MB disk space to capture 1 second video. To achieve 13MB/

      sec or above Read/Write speed of a HDD, you should use a 7,200rpm and Ultra DMA

      enabled HDD.

•Macintosh users

  MacOS 9.0.4 or later

  Apple PowerBook G3 233, 250, 266, 292, 300, 333

 

, 400

  *

 If your PowerBook G3 is not 333 or 400, frame dropping may happen when you capture

   a video from a DVCAM directly to a FireWire HDD. So, when you want to capture a video

   from a DVCAM directly to a FireWire HDD, PowerBook G3 333 or 400 is recommended.