RATOC Systems CBFW3 User Manual

Macintosh

7-3.Connecting a FireWire device to the CBFW3

Follow the steps to connect a 1394 Hard Disk Drive(HDD).

1.Insert the CBFW3 into the PC Card slot.

2.Connect the optional AC adapter(sold separately) to the CBFW3 only when you connect a

FireWire device which needs cable power such as a HDD, MO.

3.Connect a FireWire device to the CBFW3 with an FireWire cable.

4.You can connect the FireWire device without turning off the Mac or FireWire device.

Only when you connect a FireWire device which

needs cable power such as a HDD, MO, this AC

Adapter is required.(Sold separately)

;;;;;;;;;;;;;;;;;;;;;;;;;;

6pin

NOTE

1.The 6 pin to 6 pin cable is not included in the CBFW3 package.

2.The cable powered HDD, MO doesn’t work without a power source, typically DC +12V,

1.2A. You can use our optional AC power adapter, DC +12V, 1.2A. You can order this AC

power adapter. Refer to the Chapter 10.

4pin