RATOC Systems CB31U User Manual
19
W
indows Me
2. Setup
2-3. Windows Me Setup
Here’s how to get started with the CB31U and SCSI devices on Windows Me:
1. Check the restrictions before you install the CB31U.
2. Install the CB31U into the PC. Refer to Chapter 2-3-1.
3. Confirm the installation. Refer to Chapter 2-3-2.
4. Remove the CB31U from the PC. Refer to Chapter 2-3-3.
5. Connect the CB31U to the PC. Refer to Chapter 3-1.
6. Confirm the SCSI connection. Refer to Chapter 3-2.
2-3-1. Installing the CB31U on Windows Me
1. Check to see if your PCMCIA Controller supports CardBus PC Cards.
a. Click My Computer with the right button.
b. Select Properties. You will see the System Properties window below.
c. Click the Device Manager tab.
d. Double-click on the PCMCIA socket string and make sure there is a CardBus controller name
string without “!” or “X” marks.
If you find a PCIC or compatible PCMCIA controller string under the PCMCIA socket, your PC
Card slot may not be able to use CardBus PC Card or CardBus setting may be set disable in the
BIOS of your PC. If CardBus setting is set disable in the BIOS, select CardBus from Disable/PCIC
Compatible/CardBus option in the BIOS to set CardBus setting enable.