IBM CTI 2572 User Manual
CTI 2572 Technical Overview Manual
19
IPX/SPX
IPX (Internet Packet eXchange) and SPX (Sequenced Packet eXchange) are proprietary
protocols used by Novell Netware. IPX is similar to Xerox’s Internet Datagram Protocol. IPX
provides an unreliable connectionless transmission service. Since IPX is classified as an
unreliable protocol, upper level command protocols (such as Netware Core Protocol) must
provide their own delivery verification. The verification technique involves sending a single
request packet and expecting an acknowledgement. If an acknowledgement is not received after
a given period of time, a retry is initiated. IPX data packet sizes tend to be small (512 bytes or
less), thus a large number of individual packets may be required to transfer data.
protocols used by Novell Netware. IPX is similar to Xerox’s Internet Datagram Protocol. IPX
provides an unreliable connectionless transmission service. Since IPX is classified as an
unreliable protocol, upper level command protocols (such as Netware Core Protocol) must
provide their own delivery verification. The verification technique involves sending a single
request packet and expecting an acknowledgement. If an acknowledgement is not received after
a given period of time, a retry is initiated. IPX data packet sizes tend to be small (512 bytes or
less), thus a large number of individual packets may be required to transfer data.
SPX (Sequenced Packet eXchange) is similar to Xerox’s SPP(Sequenced Packet Protocol). It
provides a connection oriented service that provides high reliability, correctly retransmitting and
re-ordering packets when they are dropped or misrouted. SPX is typically used with applications
such as print spoolers that transfer large sequential streams of data.
provides a connection oriented service that provides high reliability, correctly retransmitting and
re-ordering packets when they are dropped or misrouted. SPX is typically used with applications
such as print spoolers that transfer large sequential streams of data.
Novell Netware has become a popular networking product, partially because the low overhead of
IPX/SPX allowed it to be run on 8088 and 80286 class DOS machines with reasonable
performance. More recently, Novell has announced that they will support the TCP/IP as a native
Netware protocol.
IPX/SPX allowed it to be run on 8088 and 80286 class DOS machines with reasonable
performance. More recently, Novell has announced that they will support the TCP/IP as a native
Netware protocol.
TCP/IP
Of all the popular LAN protocols, only TCP/IP can be considered to be "open" (i.e. non-
proprietary). TCP/IP (Transmission Control Protocol/Internet Protocol) was developed under the
auspices of the Defense Advanced Research Project Agency( DARPA) as a standard for
interconnecting the variety of military and university research computers and networks. The
focus of the TCP/IP designers was to provide a practical , effective, and open-standard protocol.
As a result of this design philosophy, TCP/IP has garnered a very large installed base which
continues to grow rapidly. TCP/IP has proven to be an effective protocol not only for tying
together worldwide networks, but also for local area network communications.
proprietary). TCP/IP (Transmission Control Protocol/Internet Protocol) was developed under the
auspices of the Defense Advanced Research Project Agency( DARPA) as a standard for
interconnecting the variety of military and university research computers and networks. The
focus of the TCP/IP designers was to provide a practical , effective, and open-standard protocol.
As a result of this design philosophy, TCP/IP has garnered a very large installed base which
continues to grow rapidly. TCP/IP has proven to be an effective protocol not only for tying
together worldwide networks, but also for local area network communications.
IP (Internet Protocol) is similar to Netware IPX. It provides connectionless node to node routing
and packet delivery services. TCP (Transmission Control Protocol) provides connection-
oriented services and uses the services of IP to transmit TCP data segments. Other facilities such
as TELNET (terminal emulation), SNMP (Simple Network Management Protocol) and FTP (File
Transfer Program) use the services of TCP and IP to accomplish their tasks. TCP/IP was chosen
as the higher level protocol for the 2572 because:
and packet delivery services. TCP (Transmission Control Protocol) provides connection-
oriented services and uses the services of IP to transmit TCP data segments. Other facilities such
as TELNET (terminal emulation), SNMP (Simple Network Management Protocol) and FTP (File
Transfer Program) use the services of TCP and IP to accomplish their tasks. TCP/IP was chosen
as the higher level protocol for the 2572 because:
1)
It is a non-proprietary "open" standard,
2)
It has a proven track record for performance and reliability,
3)
It has been successfully implemented on most major computer operating systems
(including Unix, DOS, VMS, OS/2).
(including Unix, DOS, VMS, OS/2).
The following chapter discusses TCP/IP in more detail.