Hotbrick LB-2 User Manual
HotBrick Network Solutions
Load Balance
This screen is only operational if using Internet connections on both WAN ports.
Figure 10: Load Balance
These settings are only functional if using both WAN ports. If using both WAN ports, these settings
determine the proportion of traffic sent over each port.
determine the proportion of traffic sent over each port.
Settings – Load Balance
Load Balance
Configuration
Configuration
• Enable – Use this to enable your Load Balance settings. Unless this is
checked, the other settings on this screen have no effect.
• Balance Type – Select the desired option:
• Bytes rx+tx – Traffic is measured by Bytes.
• Packets rx+tx – Traffic is measured by Packets.
• Sessions established – Traffic is measured by Sessions.
• Packets rx+tx – Traffic is measured by Packets.
• Sessions established – Traffic is measured by Sessions.
• Loading Share on WAN 1 – Enter the percentage (%) of traffic to be sent
over WAN 1. If one WAN port connection has greater bandwidth than the
other, the one with the greater bandwidth should be given a higher percentage
of traffic than the other.
other, the one with the greater bandwidth should be given a higher percentage
of traffic than the other.
Click the "Update" button to save your changes.
21