MGE UPS Systems 66244 User Manual
www.mgeups.com
Network
Management Cards
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card
– User Manual
34003676EN/GA
Page
59/69
Please Enter Your Choice =>
This menu enables configuration of access to the four supervision stations (identified by the IP address) with
read/write community names different to those already defined in the card “1” menu.
First enter the figure corresponding to the command to be carried out, then the number of the target input.
The example below shows how to configure the read/write rights for a station (172.17.1.1) with a community
name MyCom:
read/write community names different to those already defined in the card “1” menu.
First enter the figure corresponding to the command to be carried out, then the number of the target input.
The example below shows how to configure the read/write rights for a station (172.17.1.1) with a community
name MyCom:
Please Enter Your Choice => 1
Entry Number : 1
Enter IP address : [0.0.0.0] 172.172.1.1
Enter Community String : [public] MyCom
Select Access Type -
[NotAccess]
1. Read
2. Read/Write
3. NotAccess
Entry Number : 1
Enter IP address : [0.0.0.0] 172.172.1.1
Enter Community String : [public] MyCom
Select Access Type -
[NotAccess]
1. Read
2. Read/Write
3. NotAccess
Please Enter Your Choice => 2
+============================================================================+
| IP Address Community String Access |
+============================================================================+
[1] 172.172.1.1 MyCom Read/Write
+============================================================================+
| IP Address Community String Access |
+============================================================================+
[1] 172.172.1.1 MyCom Read/Write
6.1.4 Choice 4: Restore default configuration
Use this function to restore the card’s factory configuration. Reboot the card so that the network parameter
changes are taken into account.
changes are taken into account.
6.1.5 Choice 5: Reset the card
Use this function to reboot the card