Moxa Technologies 5600 User Manual

NPort 5600 Series User’s Manual 

Configuring Windows Administrator 

Add the target to which you would like 
to map COM ports. 

 
The NPort list that appears is the list generated by the 
previous Broadcast Search. Select the NPort to which you 
would like to map COM ports. 

 
Select COM Setting to modify COM No., default setting, 
etc. 

 
Select the COM No. 
COM ports that are “In use” or “Assigned” 
will also be indicated in this drop-down list. 
If you select multiple serial ports or multiple 
NPorts, remember to check the “Auto 
Enumerating” function to use the COM No. 
you select as the first COM No. 

 
Hi-performance mode is the default for Tx mode. If the 
driver completes sending data out to the NPort, the driver will 
respond “Tx Empty” to the program. 
 
Under classical mode, the driver will not notify the user’s 
program that Tx is completed until all Tx data has been sent 
out from the NPort; this mode will cause lower throughput. If 
you want to ensure that all data is sent out before further 
processing, classical mode is recommended. 
 
Enable/Disable Tx/Rx FIFO. If disabled, NPort will send 
one byte each time the Tx FIFO becomes empty; and an Rx 
interrupt will be generated for each incoming byte. This will 
result in a faster response and lower throughput. If you want 
to use XON/XOFF flow control, we recommend setting FIFO 
to Disable. 
 

 

6-14