ZyXEL Communications P-661HW Series User Manual

P-661H/HW Series User’s Guide

Chapter 6 Wireless LAN

115

Figure 56   Wireless: Static WEP Encryption

The following table describes the wireless LAN security labels in this screen.

In order to configure and enable WPA(2)-PSK authentication; click Network > Wireless 
LAN to display the General screen. Select WPA-PSK or WPA2-PSK from the Security 
Mode list.

Table 38   Wireless: Static WEP Encryption

Security Mode

Choose Static WEP from the drop-down list box.

Passphrase

Enter a Passphrase (up to 32 printable characters) and clicking Generate. The ZyXEL 

Device automatically generates a WEP key.

WEP Key

The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless 

clients must use the same WEP key for data transmission.
If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII 

string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 64-bit, 128-bit or 

256-bit WEP key respectively.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to reload the previous configuration for this screen.

Advanced 

Setup

Click Advanced Setup to display the Wireless Advanced Setup screen and edit 

more details of your WLAN setup.