ZyXEL Communications P-2302 User Manual

 Chapter 10 Phone

P-2302HWUDL-P1 Series User’s Guide

Your ZyXEL Device has a built in Digital Enhanced Cordless Telecommunications (DECT) 
base station. DECT is an ETSI (European Telecommunications Standards Institute) standard 
for digital cordless phones which specifies how they transmit, receive and process data and 
voice communication. 

Figure 78   DECT Base Station Overview

The DECT base station follows the Generic Access Profile (GAP). GAP (a subset of DECT) 
specifies how DECT phones register with a DECT base station. The DECT GAP standard 
ensures that two different products (a phone and a base station) from different manufacturers 
can work together. Any phone that supports GAP can make and receive calls through the 
ZyXEL Device.

In order to use your DECT phone with the ZyXEL Device, the DECT phone must register with 
the ZyXEL Device’s DECT base station. Follow these steps to register your DECT phone with 
the ZyXEL Device.

1 Press down the DECT base station button (A) on top of your ZyXEL Device for 6 to 11 

seconds to put the ZyXEL Device in registration mode. 
Registration mode refers to the state of the ZyXEL Device when it is scanning for DECT 
phones in its surrounding area. The ZyXEL Device stays in registration mode for 30 
seconds.

"