ZyXEL Communications P-2302 User Manual

 Chapter 13 VoIP Trunking

P-2302HWUDL-P1 Series User’s Guide

Use this screen to set up rules that determine which peer VoIP device your call will be 
forwarded to. To access this screen, click 

Password

Enter the corresponding password for the username you entered. The remote 

peer device must have the same password in an incoming authentication entry in 

order to authenticate your connection. Enter up to 32 alphanumeric characters.

Peer IP

Enter the IP address of the remote peer device which you want to connect to.

Peer Port

Enter the port number through which your ZyXEL Device will connect to the 

remote peer device. The default value is the standard port for VoIP 

communication. Do  not change this value unless the remote peer device does not 

follow the standard.

Incoming 

Authentication

You can set up multiple accounts which are allowed to use your ZyXEL Device for 

VoIP trunking. When peer devices want to forward calls through your ZyXEL 

Device, this is the list your ZyXEL Device checks to see if the user has the right to 

complete the call.

#

This is the index number of the incoming authentication accounts.

Username 

Enter a username for the account. This username is used to authenticate peer 

devices forwarding calls through the ZyXEL Device. Enter up to 32 alphanumeric 

characters.

Password

Enter the password for the corresponding username. This password is used to 

authenticate peer devices calling the ZyXEL Device. Enter up to 32 alphanumeric 

characters.

Apply

Click this to apply your settings to the ZyXEL Device.

Cancel

Click this to reset the fields to their last saved values.

VoIP > Trunking > Peer Call

 (continued)