ZyXEL Communications P-2302 User Manual

Chapter 18 Remote MGMT

P-2302HWUDL-P1 Series User’s Guide

Figure 123   Management > Remote MGMT > SNMP

The following table describes the labels in this screen.

Use this screen to control DNS access to your ZyXEL Device. To access this screen, click 
Management > Remote MGMT > DNS.

Table 99   Remote Management: SNMP

SNMP Configuration

Get Community

Enter the Get Community, which is the password for the incoming Get and 

GetNext requests from the management station. The default is public and 

allows all requests.

Set Community

Enter the Set community, which is the password for incoming Set requests 

from the management station. The default is public and allows all requests.

Trap Community

Type the trap community, which is the password sent with each trap to the 

SNMP manager. The default is public and allows all requests.

Trap Destination

Type the IP address of the station to send your SNMP traps to.

SNMP

Service Port

You may change the server port number for a service if needed, however you 

must use the same port number in order to use that service for remote 

management.

Service Access 

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify 

to access the ZyXEL Device using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Cancel

Click Cancel to begin configuring this screen afresh.